Fixing a dripping tap is a relatively simple task that can be done by following these steps:
-
Turn off the water supply: Before you start, make sure to turn off the water supply to the tap that you will be fixing. This can usually be done by turning off the isolation valve underneath the sink.
-
Remove the tap head: Use a screwdriver or an adjustable spanner to remove the tap head. This will expose the tap mechanism underneath.
-
Replace the washer: The most common cause of a dripping tap is a worn-out washer. Remove the old washer and replace it with a new one. You can find replacement washers at most hardware stores.
-
Reassemble the tap: Once you have replaced the washer, reassemble the tap by screwing the tap head back onto the mechanism.
-
Turn on the water supply: Finally, turn on the water supply and test the tap to ensure that it is no longer dripping.
If replacing the washer does not solve the problem, it may be necessary to replace the entire tap mechanism. In this case, it is recommended to call a plumber for assistance.
